Surface-active cleaning foam for professional cleaning and disinfection of automotive air conditioning systems. Removes dirt, fungi and Bacteria viruses and proven to kill them. Neutralizes unpleasant smells.

Application area

Air conditioning foam cleaner was specially developed for the quick and uncomplicated cleaning and disinfection of Air conditioning systems in cars, commercial vehicles, buses and stationary air conditioning systems.

Application nodes

Before use, dry the evaporator for approx. 5-10 minutes (circulating air at a warm temperature) and then the engine or Home AC system turn off. Shake the can well before use. Insert the adapter into the drainage, or onto the the Home evaporator, hose and the complete contents spray into the evaporator unit. After approx. 15 min. The cleaning process is completed. The Service recommendations of the vehicle manufacturers for cleaning the air conditioning system must be followed. Recommended use every 6 months.

Use biocidal products carefully.
Always read the label and product information before use.
Contains: 0.16 g / 100 g N-alkyl (C12-16) -N, N-dimethyl-N-benzylammonium chloride
Reg No .: N-92433

Hazard warnings
Extremely flammable aerosol. Container is under pressure: May burst if heated.

safety instructions
If medical advice is needed, have product container or label at hand. Keep out of the reach of children.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke. Not against
Spray open flame or other ignition source. Do not puncture or burn, even after use. In front
Protect sunlight and do not expose to temperatures above 50 ° C / 122 ° F. This product and its container are as
dispose of hazardous waste.


250 ml sufficient for one application

Treatment time

approx. 15 min

Weight N/A